There are only two units required to build you planter or garden wall. Notice that some of the copings (when turned upside down) have a splitting groove which can be used for making corner pieces. If corners are not required use a chisel to break out the center nub and use as a coping piece.
| Prepare Base |
| Excavate trench 200mm (8") deep and 400mm (16") wide. Place and compact gravel to 100mm (4") depth. |
 |
| First Course |
| Place only standard units on gravel base. Ensure units are level from back to front and from side to side. |
 |
| Stack Units |
| Stack units along wall. Coping units can be used in the wall, but should not be stacked on other coping units without adhesive. |
 |
| Placing Coping |
| Place a line of adhesive in front of and behind the tongue on the second last course. Position coping stones on top. |
| NOTES TO PRODUCT NOMINAL DIMENSIONS, WEIGHTS AND PACKAGING TABLES: |
- All dimensions are based on Metric Units with soft conversion to Imperial.
- All dimensions include a 3 mm (1/8 in) joint.
- Areas per bundle are calculated on the mold manufacturers dimensions with an allowance for standard sand joints.
- All product packaged on pallets.
- f you require more information on this or any other service, please contact our office.
|
